Home Sviluppo progetti Supporto kit ArduSiPM Mepa
Categorie Robotica / Domotica Schede di controllo Programmabili


COD : HD-G145457216438
59,80 € (excl. VAT)
72,96 € (incl. IVA)
Disponibilità :
on-order.gif spedito in 30 giorni

The ODROID-C2 is a 64-bit quad-core single board computer(SBC)
that is one of the most cost-effective 64bit development boards available in the ARM world. 
It can function as a home theater set-top box, a general purpose computer for web browsing,
gaming and socializing, a compact tool for college or office work, a prototyping device for hardware tinkering,
a controller for home automation, a workstation for software development,
and much more. 
Some of the modern operating systems that run on the ODROID-C2 are Ubuntu, Android, ARCHLinux, Debian, with thousands of free open-source software packages available. The ODROID-C2 is an ARM device -- the most advanced architecture for mobile devices and embedded 64-bit computing. The ARM processor’s small size, reduced complexity and low power consumption makes it very suitable for miniaturized devices such as wearables and embedded controllers.

* Amlogic ARM® Cortex®-A53(ARMv8) 2Ghz quad core CPUs 
* Mali™-450 GPU (3 Pixel-processors + 2 Vertex shader processors)
* 2Gbyte DDR3 SDRAM
* Gigabit Ethernet
* HDMI 2.0 4K/60Hz display
* H.265 4K/60FPS and H.264 4K/30FPS capable VPU
* 40pin GPIOs + 7pin I2S
* eMMC5.0 HS400 Flash Storage slot / UHS-1 SDR50 MicroSD Card slot
* USB 2.0 Host x 4, USB OTG x 1 (power + data capable)
* Infrared(IR) Receiver
* Ubuntu 16.04 or Android 5.1 Lollipop based on Kernel 3.14LTS


Here is the comparisons to give you better understanding of ODROID-C2.

ODROID-C2 vs ODROID-C1 vs Raspberry Pi2

Both are Linux-friendly ARM® single-board computers for various applications and purposes.

Hardware Comparison

The ODROID-C2 has many advantages over the Raspberry Pi2. 

The processor is an S905 2GHz Quad-core from Amlogic with 2GByte DDR3 RAM, Gigabit-Ethernet and IR-receiver. The size of this computer is still only 85 x 56 mm with a weight of 40g, and offers silent operation, 2~5W average power usage, and instant portability, since it fits in a shirt pocket. 

One powerful feature of the ODROID-C2 is an SD 3.01 standard compatible UHS-1 MicroSD card, as well as the faster eMMC module, can be ordered with the ODROID-C2, and arrives with the popular Ubuntu operating system already installed. Insert the MicroSD card into the slot, connect a monitor, a keyboard, a mouse, Ethernet and power cable, and that’s all you need to do to use the ODROID-C2! Browse the web, play games, run office programs, edit photos, develop software, and watch videos right away.

The ODROID-C2 also has a 40+7pin GPIO header to make a physical interface between the board and the outside world. The 40+7pin interface headers include PWM, I2C, I2S, UART, ADC and GPIO function. 

The IR receiver and ADC features on the ODROID-C2 offer many options for building great DIY projects. 

Amlogic S905 SoC
4 x ARM Cortex-A53 2GHz
64bit ARMv8 Architecture @28nm
Amlogic S805 SoC
4 x ARM Cortex-A5 1.5GHz
32bit ARMv7 Architecture @28nm
Broadcom BCM2836
4 x ARM Cortex-A7 900MHz
32bit ARMv7 Architecture @40nm
GPU 3 x ARM Mali-450 MP 700MHz 2 x ARM Mali-450 MP 600MHz 1 x VideoCore IV 250MHz
RAM 2GB 32bit DDR3 912MHz 1GB 32bit DDR3 792MHz 1GB 32bit LP-DDR2 400MHz
Flash Storage Micro-SD UHS-1 @83Mhz/SDR50 or
eMMC5.0 storage option
Micro-SD UHS-1 @78Mhz/SDR50 or
eMMC4.5 storage option
Micro-SD @ 50Mhz/SDR25
No eMMC storage option
USB2.0 Host 4 Ports 4 Ports 4Ports
USB2.0 Device /
1 Port for Linux USB Gadget device or
USB host
1 Port for Linux USB Gadget device or
USB host
Ethernet / LAN 10 / 100 / 1000 Mbit/s 10 / 100 / 1000 Mbit/s 10 / 100 Mbit/s
Video Output HDMI 2.0 4K / 60Hz HDMI 1.4 HDMI 1.4 / RCA / DSI
Audio Output HDMI / I2S HDMI / I2S MDMI / 3.5mm Jack / I2S
Camera Input USB 720p USB 720p MIPI CSI 1080p
Real Time Clock No (unless using an add-on module) Yes (on-board RTC) No (unless using an add-on module)
IR Receiver Yes (on-board IR sensor) Yes ( on-board IR sensor) No (unless using an add-on module)
IO Expansion 40 + 7 pin port
40 + 7 pin port
40 pin port
ADC 10bit SAR 2 channels 10bit SAR 2 channels No (unless using an add-on board)
Heat sink Included Included Optional
Size 85 x 56 mm (3.35 x 2.2 inch) 85 x 56 mm (3.35 x 2.2 inch) 85 x 56 mm (3.35 x 2.2 inch)
Weight 40g (1.41oz) 40g (1.41oz) 42g (1.48oz)

CPU and RAM performance comparison

We ran several different benchmarks to measure the computing power on the ODROID-C2. The same tests were performed on the Raspberry Pi 2, ODROID-C1, ODROID-U3 and ODROID-XU4 for easier comparison. 

The values of the test results were scaled uniformly for comparison purposes. The computing power of the C2 was measured to be ~2-3 times faster than the latest Raspberry Pi 2 thanks to the 2Ghz Cortex-A53 cores and much higher memory bandwidth. The high-performance 2GB DDR3 RAM is an additional advantage allowing most programs to run smoothly on the C2. 

Benchmarks (Index Score) Raspberry Pi 2 ODROID-C1 ODROID-U3 ODROID-C2 ODROID-XU4
Dhrystone-2 1006.6 1262.8 2300.7 2623.9 3994.1
Double-Precision Whetstone (x3) 1076.1 1318.8 2217.9 3015.6 3074.7
Nbench 2.2.3 Integer (x40) 840.0 1208.0 1648.0 1764.0 2451.1
Nbench 2.2.3 FP (x100) 809.0 1050.0 1860.0 2210.1 2536.9
SysBench CPU (1/T * 50000) 6669.3 902.2 1497.0 2040.8 2891.8
Memory BandWidth (mbw 100 : MiB/s) 557.1 1069.6 736.6 3171.6 3243.8

Antutu Scores on Android5.1 Lollipop

ODROID-C2 shows around 33,700pts while ODROID-C1+ shows around 21,200pts. So you can run Android OS more smoothly. Note that the XU4 shows around 51,000pts thanks to the much faster A15 cores and Mali-T628 MP6 GPU cores. But the ODROID-C2 has higher rate of the “Performance per Dollar” probably. 

Storage I/O comparison

The C2 can boot from a MicroSD card or an eMMC module. The MicroSD interface supports the higher performance UHS-1 mode as well. File access of a 512MB file (read/write) on two different storage options shows distinct performance differences. The eMMC 5.0 storage is ~7x faster than the MicroSD Class-10 card in read tests. The MicroSD UHS-1 card is ~2x faster than the MicroSD Class-10 card in read tests. The MicroSD UHS-1 card provides a great low-cost option for many applications! 

To obtain the results in the storage I/O comparison graph, type the following lines at a command prompt.
Write speed command : 
$ dd if=/dev/zero of=test.tmp oflag=direct bs=8M count=64

Read speed command : 
$ dd if=test.tmp of=/dev/null iflag=direct bs=8M count=64

ODROID-C2 ODROID-C1 Raspberry Pi2
MicroSD UHS-1 Read(MB/s) 36.7 32.5 19.2
MicroSD UHS-1 Write(MB/s) 15.5 14.2 13.2
eMMC Read(MB/s) 125.0 62.2 NA
eMMC Write(MB/s) 124.0 25.2 NA

Ethernet Performance Comparison

The ODRID-C2 has an on-board Gigabit Ethernet controller. Our bi-directional streaming speed was measured at ~900Mbps. 
Thanks to the doubled Tx buffer in S905, the upload speed is twice faster than C1.

ODROID-C2 ODROID-C1 Raspberry Pi2
iperf Server on SBC
935.0 9280 98.6
iperf Server on PC
928.0 392.0 66.5

Test condition
Server mode : iperf -s
Client Mode : iperf -c [ip address] -P 10 -W 32k

The 4K HDMI output shows gorgeous desktop screen on 3840 x 2160 UHD resolution. 
But the rendering speed is not good due to the limited performance.

4K video playback on the Android OS is quite stable and fast for 4K/HEVC playback on a real 4K display.


Processor Amlogic S905 SoC ARM® Cortex®-A53 (ARMv8) 2.0GHz Quad Core ARMv8 architecture @28nm wafer
Memory 2Gbyte DDR3 SDRAM
3D Accelerator ARM® Mali™-450 OpenGL ES 2.0 / 1.1 (3 x Pixel processors and 2 x Vertex shader processors)
Flash Storage eMMC 5.0 Module Socket : 8~64GB eMMC module (option)
MicroSD Card Slot : 8 ~128GB MicroSD UHS-1 (option)
USB2.0 Host High speed standard A type connector x 4 ports
USB2.0 Device/OTG High Speed USB standard A type connector x 1 port
Ethernet/LAN 10/100/1000Mbps Ethernet with RJ-45 Jack (Auto-MDIX support)
Video Output HDMI2.0
Audio Output HDMI / I2S
Camera Input USB 720p(option)
IO Expansion 40pin port (GPIO / UART / I2C / ADC)
7pin port (I2S)
WiFi USB IEEE 802.11b/g/n WLAN with Antenna (USB module) (option)
Power 5V 2A Power (option)
System Software Ubuntu 16.04 on Kernel 3.14
Android 5.1.x on Kernel 3.14
Full source code is accessible via our Github.
Board Size 85 x 56 x 18 mm approx. (Weight : 40 gram w/o heat sink, 56 gram with heat sink)
PCB Thickness : 1.0mm


Board Revision 0.0

When we first got the information of S905 and its price, we were so amazed. We had started outlining the product concept. It was rather simple. The ODROID-C1+ fulfils the most of customers' requirement. 

The hardware design of the ODROID-C2 was started from May 2015. The performance of the S905 is twice faster than S805, and it support HS400 eMMC Mode which also increase the data transfer speed two time faster. The RAM is also doubled to 2GB on C2 while the C1+ has 1GB. There are 4 x 512MB RAMs, two on top and two on bottom. 

The first revision had same blue color as C1+. 

This revision was used only for internal software development and evaluation. 

Board Revision 0.1

It took around two months to evaluate and update the hardware design. The first revision board was on our hands in September 2015. The color of the C2 PCB is changed to black from this revision for easier distinguish from the C1+ board.

ARMv8 64bit processor requires more optimization work than our expectation. After 9months software work, we could send around 40 units of this revision to forum members in January 2016.
We give special thanks to our valuable forum members for the feedback and support on this project. 

We officially announced this project via our forum in February 2016. 

Board Revision 0.2

This is the first mass production version.
A few missing/wrong GPIO pins on the 40pin header are corrected.


Pagamenti con:


Carta di credito

Bonifico bancario



Spedizioni in tutto il mondo

con tariffe ridotte


Info line


orario continuato

dal lunedì al venerdì


(0039) 06 76971136



Le informazioni riportate su
possono essere soggette a modifiche senza preavviso, alcune immagini sono a titolo indicativo.
Tutti i marchi citati sono di proprietà delle rispettive case e produttori.

Sede legale

ROBOT DOMESTICI INDUSTRIES di ARMANDO PALIANI - Via Cornelio Labeone, 76 - 00174 Roma (RM)
P.I. IT12960231004 - C.F. PLNRND74R03G763Q - REA di Roma n. RM 1413309
Tel. (+39) 06 76971136 | e-mail:


facebook twitter instagram youtube pinterest