Descrisption:
Music Robot Kit V2.0 (With Electronics) is the improvement version of Music Robot Kit V1.0 (With Electronics).
Improvements List:
Me BaseBoard instead of previous Meduino and Me BaseShield. Reduce Size and easier to users.
Simplify the mechanical structure, reduce some unnecessary components
Adding LED RGB strip to bring some shiny effects when playing the music
Adding two new control modeMe Ultrasonic modules allows users to play the music via detecting the position of gesturesa pre-programmed tune can be played
Descrisption:
Music Robot Kit V2.0 (With Electronics) is the improvement version of Music Robot Kit V1.0 (With Electronics).
Improvements List:
Me BaseBoard instead of previous Meduino and Me BaseShield. Reduce Size and easier to users.
Simplify the mechanical structure, reduce some unnecessary components
Adding LED RGB strip to bring some shiny effects when playing the music
Adding two new control modeMe Ultrasonic modules allows users to play the music via detecting the position of gesturesa pre-programmed tune can be played
This kit can be used to build a Music Robot. It can play the Xylophone by an application via USB cable installed on computer. By this application you can use your keyboard of computer to play the Xylophone by the Number Key from 1 to 7 directly. And you can also type a music score in the application and then send it to the robot, the robot will play the music you have sent automatically.
Features:
- Three different ways to play this Music Robot
1.Control by the position of gestures(Using an ultrasonic modules detect the position)
2.A pre-programmed tune can be played(or you programme to play)
3.Control by PC Software
- High quality stepper motor mates with high performance Me stepper motor dirver
- Easy to drive and can play Xylophone very well
- Strong aluminum extrusion parts, anodizing surface
Power Supply: 12V
Documents:
Arduino Library
For more details about this product, please visit Makeblock wiki page. If you have any question about this product or you need technical support, please post it in Makeblock forum.
Part list:
1 x Beam 0824-48 |
1 x Wrench 7mm |
2 x Beam 0824-96 |
12 x Socket Cap Screw M4x8 |
1 x Beam 0808-88/96 |
30 x Socket Cap Screw M4x14 |
1 x Beam 0808-184/192 |
26 x Nut M4 |
2 x Slider 496 |
8 x Countersunk Screw M3x8 |
1 x Bracket 3x6 |
5 x Headless Set Screw M3x5 |
1 x Plate 3x6 |
8 x Plastic Rivet R4060 |
1 x Plate 7x9 |
4 x Plastic Rivet R4100 |
1 x Plate I1 |
4 x Plastic Rivet R4120 |
1 x Belt Connector |
6 x Plastic Ring 4x7x2mm |
1 x 42BYG Stepper Motor Bracket |
1 x Xylophone |
1 x DC Frame Type Solenoid HCNE1-0530 |
1 x Streamer |
1 x 42BYG Stepper Motor |
1 x Me-Baseboard |
1 x Shaft Connector-4mm |
1 x Me-Ultrasonic Sensor |
2 x Timing Pulley 62T |
1 x Me Stepper motordriver V1.0 |
4 x Timing Pulley Slice 62T |
1 x LED RGB Strip-Addressable, Sealed(0.5M) |
1 x Open-end Timing Belt (1.3m) |
1 x Micro Switch |
2 x Threaded Shaft 4x39mm |
1 x RJ25 Adapter |
2 x Shaft Collar 4mm |
1 x Wall Adapter Power Supply - 12VDC |
4 x V-slot Bearing |
3 x 6P6C RJ25 cable-20cm |
2 x Flange Bearing 4x8x3mm |
1 x USB 2.0 A-Male to Micro B-Male Cable |
1 x HEX Screwdriver 3mm |
1 x Base Bracket |
1 x Cross Screwdriver 3mm |
8 x Nylon cable ties 2*100 |
2 x HEX Allen Key 1.5mm |
1 x Music Robot Kit V2.0 QR code card |
This kit can be used to build a Music Robot. It can play the Xylophone by an application via USB cable installed on computer. By this application you can use your keyboard of computer to play the Xylophone by the Number Key from 1 to 7 directly. And you can also type a music score in the application and then send it to the robot, the robot will play the music you have sent automatically.
Features:
- Three different ways to play this Music Robot
1.Control by the position of gestures(Using an ultrasonic modules detect the position)
2.A pre-programmed tune can be played(or you programme to play)
3.Control by PC Software
- High quality stepper motor mates with high performance Me stepper motor dirver
- Easy to drive and can play Xylophone very well
- Strong aluminum extrusion parts, anodizing surface
Power Supply: 12V
Documents:
Arduino Library
For more details about this product, please visit Makeblock wiki page. If you have any question about this product or you need technical support, please post it in Makeblock forum.
Part list:
1 x Beam 0824-48 |
1 x Wrench 7mm |
2 x Beam 0824-96 |
12 x Socket Cap Screw M4x8 |
1 x Beam 0808-88/96 |
30 x Socket Cap Screw M4x14 |
1 x Beam 0808-184/192 |
26 x Nut M4 |
2 x Slider 496 |
8 x Countersunk Screw M3x8 |
1 x Bracket 3x6 |
5 x Headless Set Screw M3x5 |
1 x Plate 3x6 |
8 x Plastic Rivet R4060 |
1 x Plate 7x9 |
4 x Plastic Rivet R4100 |
1 x Plate I1 |
4 x Plastic Rivet R4120 |
1 x Belt Connector |
6 x Plastic Ring 4x7x2mm |
1 x 42BYG Stepper Motor Bracket |
1 x Xylophone |
1 x DC Frame Type Solenoid HCNE1-0530 |
1 x Streamer |
1 x 42BYG Stepper Motor |
1 x Me-Baseboard |
1 x Shaft Connector-4mm |
1 x Me-Ultrasonic Sensor |
2 x Timing Pulley 62T |
1 x Me Stepper motordriver V1.0 |
4 x Timing Pulley Slice 62T |
1 x LED RGB Strip-Addressable, Sealed(0.5M) |
1 x Open-end Timing Belt (1.3m) |
1 x Micro Switch |
2 x Threaded Shaft 4x39mm |
1 x RJ25 Adapter |
2 x Shaft Collar 4mm |
1 x Wall Adapter Power Supply - 12VDC |
4 x V-slot Bearing |
3 x 6P6C RJ25 cable-20cm |
2 x Flange Bearing 4x8x3mm |
1 x USB 2.0 A-Male to Micro B-Male Cable |
1 x HEX Screwdriver 3mm |
1 x Base Bracket |
1 x Cross Screwdriver 3mm |
8 x Nylon cable ties 2*100 |
2 x HEX Allen Key 1.5mm |
1 x Music Robot Kit V2.0 QR code card |