This is a add-on for Raspberry Pi that has combined LTE technologies Cat.M1, Cat.NB1 (NB-IoT) and eGPRS for Raspberry Pi, based on Quectel’s BG96 module. The shield has the power of new IoT phenomenon LPWA (Low Power Wide Area) with Cat.M1 and NB-IoT connection functionalities. Besides, it also provides the function of eGPRS that be enhanced version of classical GPRS.
The module on shield has GNSS (GPS, GLONASS etc.) functionality for the need of location, navigation, tracking, mapping and timing applications.
If you need built-in sensors, relay and more feature, please take a look at Raspberry Pi Cellular IoT Application Shield.
Description
With the Sixfab Raspberry Pi Cellular IoT HAT you are able to send or receive data over LTE-M and NB-IoT cellular networks without needing gateways. LTE-M (Cat M1) and NB-IoT (Narrowband IoT or Cat NB1) are both for who is looking to take advantage of Low Power Wide Area Network (LPWAN) technology. In the meantime, the 2G networks have been started to shut down in some countries.
The Quectel BG96, lies on the middle of the Raspberry Pi Cellular IoT HAT, is a series of LTE Cat M1/Cat NB1/EGPRS module offering a maximum data rate of 375Kbps downlink and uplink with worldwide coverage. This LTE add-on for Raspberry Pi also supports GNSS and GPS for the need of building location, navigation, tracking, mapping and timing applications.
At this LTE HAT for Raspberry Pi, we’ve provided an easy-to-use Python library for AT commands over UART or USB connection with a bunch of tutorials enable makers, engineers, integrators and developers to easily design their applications.
Features
- Quectel BG96 LTE Cat M1 Cat NB1 EGPRS Module
- Worldwide coverage
- Fully compatible with Raspberry Pi models that have the 40-pin GPIO header (4, 3, 2, B+, A+, Zero)
- Slots on board for Raspberry Pi display and camera cables
- Supported Protocols: PPP/TCP/UDP/SSL/TLS/FTP(S)/HTTP(S)/NITZ/PING/MQTT
- Embedded GNSS (GPS, GLONASS, BeiDou/Compass, Galileo, QZSS) with selectable active/passive antenna circuitry
- SMS Mode: Point-to-point MO and MT, SMS Cell Broadcast, Text and PDU Mode
- Communicate over UART or USB with AT commands and PPP connection
Data Speeds
- Cat M1: 375Kbps (Downlink), 375Kbps (Uplink)
- Cat NB1: 32Kbps (DL), 70Kbps (UL)
- EDGE: 296Kbps (DL), 236.8Kbps (UL)
- GPRS: 107Kbps (DL), 85.6Kbps (UL)
Key Applications
- Asset Tracking
- Vending Machines
- PetLivestock Tracking
- Smart Bicycles
- Environmental Monitoring
- Waste Management
- Smoke Detectors
- Water/Gas Metering
- Tank Monitoring
- Soil Humidity Sensors
- Smart Lightning
Package Includes
- Sixfab Raspberry Pi Cellular IoT HAT
- LTE – GNSS Dual u.FL Antenna – 100mm
- Long Stackable Header – No need to solder, stack and use!
- Right Angle Micro USB Cable
Documents
Pinout