Abbiamo aggiornato la nostra informativa sulla privacy.
Se vuoi saperne di più visualizza il dettaglio della nostra informativa sulla privacy.
Questo sito utilizza i cookies di profilazione.
Proseguendo la navigazione acconsenti all'uso di tutti i cookies.
Se vuoi saperne di più visualizza il dettaglio della nostra Cookies Policy.
Fits perfectly into the lid of the official Raspberry Pi 4 Case
Temperature-controlled fan delivers up to 1.4CFM of airflow over the processor, memory, and power-management IC
18mm — 18mm — 10mm heatsink with self-adhesive pad improves heat transfer from the processor
Description
The Raspberry Pi 4 Case Fan is an official accessory for Raspberry Pi 4, intended to be used in conjunction with the official Raspberry Pi 4 Case. Designed for over-clockers and other power users, it keeps your Raspberry Pi 4 at a comfortable operating temperature even under heavy load.
Specifications
Specification
Details
Input voltage
5V DC supplied via 40-pin GPIO header on Raspberry Pi 4
Fan speed control
Pulse width modulation control via user-selectable GPIO pin
1. Insert Raspberry Pi 4 unit into the lower half (base) of the case, taking care to first remove any SD card, and to align the connectors with the apertures in the base. 2. Insert the case fan into the upper half (lid) of the case, with the fan pointing away from the lid. The two tabs on the fan housing should fit neatly into the inside of the tabs on the lids, and the slightly curved edge of the housing should be flush with the underside of the lid. 3. If you are also fitting the heatsink, remove the backing paper from the self-adhesive pad on the base of the heatsink, position it centrally over the processor and gently press it in position. 4. Connect the wires from the fan to the Raspberry Pi 4 40-pin GPIO header as follows:
Lead
Color
GPIO Pin
5V
RED
4
Ground
BLACK
6
GPIO 14
BLUE
8
5. Assemble the case.
Dimensions
Note
All dimensions are in mm
Note
This product should only be used in conjunction with a Raspberry Pi 4 Model B and the official Raspberry Pi 4 Case.
This product should be operated in a well-ventilated environment and the case should not be covered.
Attention
To avoid malfunction or damage to this product, please observe the following:
Do not expose to water, moisture, or place on a conductive surface whilst in operation.
Do not expose it to external heat from any source. The Raspberry Pi 4 Case Fan is designed for reliable
operation at normal ambient room temperatures.
Take care whilst handling to avoid mechanical or electrical damage to the fan and connectors.
Le informazioni riportate su robot-domestici.it
possono essere soggette a modifiche senza preavviso, alcune immagini sono a titolo indicativo.
Tutti i marchi citati sono di proprietà delle rispettive case e produttori.
Informazioni aziendali
ROBOT DOMESTICI SRL - Via Cornelio Labeone, 70 - 00174 Roma (RM)
Partita IVA IT15791431008 - REA di Roma n. RM 1614298
CODICE FATTURAZIONE ELETTRONICA: KRRH6B9
Tel. (+39) 06 76971136 | e-mail: info@robot-domestici.it