facebook twitter instagram google+ youtube pinterest
Utente dimenticato? Password dimenticata? Registrati




RoboClaw 2x60AHV, 60VDC Motor Controller (V6)



COD : PO-3581

RoboClaw 2x60AHV, 60VDC Motor Controller (V6)
279,95 € (excl. VAT)
341,54 € (incl. IVA)

Disponibilità :
on-order.gif spedito in 30 giorni



quantità disponibile: 2
341,54 €

Chiedi informazioni per questo prodotto (Ask a question about this product)

Overview

The RoboClaws from Basicmicro (formerly Ion Motion Control) are a family of efficient, versatile, synchronous regenerative motor controllers. They can supply brushed DC motors with 7.5 A, 15 A, 30 A, 45 A, 60 A, or 120 A continuous (depending on the model) at voltages from 6 V to 34 V or 10.5 V to 60 V (also depending on the model), and they allow for peak currents well above the maximum continuous ratings. The “Solo” versions feature a single motor control channel while the dual versions (denoted by a “2x” in their names) offer two channels for controlling a pair of motors.


Solo 30A

Solo 60A

2x7A

2x15A

2x30A

2x45A
ST 2x45A

2x60A

2x60AHV

2x160A
Motor channels: 1 2 2
Operating voltage: 6 V to 34 V 6 V to 34 V 10.5 V to 60 V
Continuous output current: 30 A 60 A 7.5 A 15 A 30 A 45 A 60 A 60 A 120 A
Peak output current: 60 A 120 A 15 A 30 A 60 A 60 A 120 A 120 A 160 A
5V BEC(1) max current: 1.2 A 1.2 A (V5B or later) 3 A 3 A
Size: 60 Ã— 32.5 Ã— 23.5 mm 48 Ã— 42 Ã— 17 mm 74 Ã— 52 Ã— 17 mm 100 Ã— 86 Ã— 30 mm 100 Ã— 86 Ã— 30 mm 212 Ã— 126 Ã— 50 mm
Weight: 130 g 18 g 60 g 295 g 295 g 1630 g
Price: $79.95 $99.95 $69.95 $89.95 $124.95 $169.95 $199.95 $279.95 $599.95

1 Battery Eliminator Circuit

The RoboClaws have a USB interface that acts as a virtual serial (COM) port, allowing it to be controlled directly from a computer, and they feature built-in commands for controlling acceleration, deceleration, distance, speed, current sense, voltage limits and more. Several other interface modes are supported by the RoboClaw as well: it can be controlled via TTL serial for use with embedded systems, RC hobby servo pulses for use as an RC-controlled electronic speed control (ESC), or analog voltages for use with potentiometers or analog joysticks.

RoboClaw automatically supports 3.3V or 5V logic levels, travel limit switches, home switches, emergency stop switches, power supplies, braking systems and contactors. Power supplies can be used by enabling the built in voltage clamping control feature. A built-in switching mode BEC supplies 5VDC at up to 1.2 A or 3 A (depending on controller model) for powering user devices.

The RoboClaws can be operated without feedback for open-loop speed control, or they can be used with a variety of feedback types for closed-loop speed or position control. Quadrature encoders with up to 19.6 million pulses per second are supported and can be auto tuned using Ion Studio, which is a free downloadable application. In addition, a wide range of sensor inputs such as potentiometers and absolute encoders are supported. RoboClaw’s closed loop functionality creates absolute control over speed and direction regardless of load changes.

RoboClaw incorporates several protection features including temperature, current, over voltage and under voltage limits. Several user definable settings such as maximum current limit, maximum and minimum battery voltages are provided for more refined control.

Details for item #3581

With an operating supply range of 10.5 V to 60 V, the RoboClaw 2x60AHV is a higher-voltage version of the 2x60A (V6), which operates from 6 V to 34 V. The AHV also has a slightly modified heat sink, which features several tapped holes that can be used for directly mounting a pair of cooling fans. Aside from the sub-millimeter-tall bosses surrounding each tapped hole, the heat sink’s outer dimensions remain the same. This RoboClaw features a USB Micro-B connector that works with our USB micro-B cables.

 

RoboClaw 2×60AHV, 60VDC Motor Controller.

 

Key Features

  • Simple bidirectional control of one or two brushed DC motors, depending on controller model
  • 6 V to 34 V or 10.5 V to 60 V operating supply range, depending on controller model
  • 7.5 A to 120 A maximum continuous current output, depending on controller model
  • Dual-channel controllers support channel bridging to allow control of a single motor with double the current capability
  • Automatic current limiting reduces duty cycle when temperature exceeds 85° C
  • Four communication or control options:
    1. USB serial interface (virtual COM port)
    2. Logic-level (TTL) serial interface for direct connection to microcontrollers or other embedded controllers
    3. Hobby radio control (RC) pulse width interface for direct connection to an RC receiver or RC servo controller
    4. Analog voltage (0 V to 2 V, 5 V tolerant) interface for direct connection to potentiometers and analog joysticks
  • Dual feedback inputs for PID closed-loop control:
    • Speed or position control with quadrature encoders, up to 19.6 million encoder pulses per second
    • Position control with analog encoders or potentiometers
    • (Open-loop control with no feedback also available)
  • Screw terminals for quick connect/disconnect
  • Configurable via pushbutton interface or USB connection and PC software
  • Regenerative braking
  • Tolerates high-speed direction changes
  • Jumper-selectable 5 V BEC
  • Battery monitoring and under-voltage cutoff protects batteries from over-discharging

Sample Code

Basicmicro has written an Arduino library for the RoboClaw that makes it easy to interface these motor controllers with an Arduino. The library comes with several example sketches that demonstrate different methods of controlling the RoboClaw.

Note: Basicmicro was formerly Ion Motion Control and Orion Robotics. Basicmicro uses the following product names and numbers for the RoboClaw controllers:

“RoboClaw Solo 30A Motor Controller”, Item Id: ION408/IMC408
“RoboClaw Solo 60A Motor Controller”, Item Id: ION410/IMC410
“RoboClaw 2x7A Motor Controller”, Item Id: ION404/IMC404 (replaces “RoboClaw 2x5A”, Item Id: ION403/IMC403)
“RoboClaw 2x15A Motor Controller”, Item Id: ION412/IMC412
“RoboClaw 2x30A Motor Controller”, Item Id: ION413/IMC413
“RoboClaw 2x45A Motor Controller”, Item Id: ION418/IMC418
“RoboClaw ST 2x45A Motor Controller”, Item Id: ION419/IMC419
“RoboClaw 2x60A Motor Controller”, Item Id: ION414/IMC414
“RoboClaw 2x60AHV Motor Controller”, Item Id: ION415/IMC415
“RoboClaw 2x160A Motor Controller”, Item Id: ION426/IMC426

RoboClaw versions V5 and above have USB Micro-B connectors; older USB RoboClaws had a USB Mini-B connector. The RoboClaw 2×160A uses a USB B connector.




Altre immagini



Pagamenti




Pagamenti con:

PayPal

Carta di credito

Bonifico bancario
anticipato

Spedizioni


24h/48h/72h

Spedizione
GRATUITA IN ITALIA
per ordini superiori ai 150,00 €

Spedizioni in tutto il mondo
con tariffe ridotte

 

Info line

 

orario continuato

dal lunedì al venerdì

10:00-16:00


(0039) 06 76971136

 


Le informazioni riportate su robot-domestici.it possono essere soggette a modifiche senza preavviso, alcune immagini sono a titolo indicativo.
Tutti i marchi citati sono di proprietà delle rispettive case.
ROBOT DOMESTICI INDUSTRIES di ARMANDO PALIANI - Via Cornelio Labeone, 76 - 00174 Roma (RM)
P.I. IT12960231004 - C.F. PLNRND74R03G763Q - REA di Roma n. RM 1413309
CODICE UNIVOCO PER LA FATTURAZIONE ELETTRONICA: KRRH6B9
Telefono 06 76971136 - Fax 06 62283886