Abbiamo aggiornato la nostra informativa sulla privacy.
Se vuoi saperne di più visualizza il dettaglio della nostra informativa sulla privacy.
Questo sito utilizza i cookies di profilazione.
Proseguendo la navigazione acconsenti all'uso di tutti i cookies.
Se vuoi saperne di più visualizza il dettaglio della nostra Cookies Policy.
Intel Galileo Gen 2 development board, the first in a family of Arduino-certified development boards based on Intel architecture and specifically designed for makers, students, educators and DIY electronics enthusiasts.
Based on the Intel Quark SoC X1000, a 32-bit Intel Pentium processor-class system on a chip (SoC), the genuine Intel processor and native I/O capabilities of the Intel Galileo board deliver great performance, and a broad spectrum of hardware peripheral and software support. The board also provides a simpler and more cost-effective development environment compared to the Intel Atom Processor- and Intel Core processor-based designs.
Whats new with Intel Galileo Gen 2
¢6-pin 3.3V USB TTL UART header replace 3.5mm jack RS-232 console port for Linux debug. New 6-pin connector mates with standard FTDI USB serial cable (TTL-232R-3V3) and popular USB-to-Serial breakout boards.
¢12 GPIOs now fully native for greater speed and improved drive strength.
¢12-bit pulse-width modulation (PWM) for more precise control of servos and smoother response.
¢Console UART1 can be redirected to Arduino headers in sketches, eliminating the need for soft-serial in many cases
¢Power regulation system changed to accept power suppliers from 7V to 15V.
FEATURES
¢Intel Quark SoC X1000 application processor, a 32-bit, single core, single-thread, Pentium instruction set architecture (ISA)-compatible CPU, operating at speeds up to 400MHz.
¢Support for a wide range of industry standard I/O interfaces, including a full-sized mini-PCI Express slot, 100Mb Ethernet port, Micro-SD slot, USB host port, and USB client port.
¢256 MByte DDR3, 512 Kbyte embedded SRAM, 8 MByte NOR Flash, and 8 Kbit EEPROM standard on the board, plus support for MicroSD card up to 32GB.
¢Hardware-/pin-compatibility with a wide range of Arduino Uno R3 shields.
¢Programmable through the Arduino integrated development environment (IDE) that is supported on ¢Microsoft Windows, Max OS, and Linux host operating systems
¢Support for Yocto 1.4 Poky Linux release.
SPECIFICATION
PROCESSOR FEATURES
Model
Intel Quark SoC X1000
Speed
400 MHz
Cores
1/1
ISA
32-bit Intel Pentium processor-compatible ISA
L1 CACHE
16 KB
SRAM
512 KB on-die, embedded; 800 MT/s
Technologies Supported
Integrated real-time clock, Optional 3 V coin cell battery for operation between turn-on cycles
STORAGE
Firmware
8 MB NOR Flash
DRAM
256 MB DDR3
SD Card (Optional)
Up to 32 GB
USB
Compatible with any USB 2.0 storage device
Eeprom
8 KB
SPECIFICATIONS
Dimensions
123.8mm (L) x 72.0mm (W)
Connectors
6-pin console UART, 6-pin ICSP, 10-pin JTAG FOR DEBUGGING, RJ45 Ethernet, Power over Ethernet capable, USB 2.0 Host (standard Type A), USB 2.0 Client (micro-USB Type B), Mini-PCI Express 1x slot, Jack with increased range (7 to 15 V)
Power
Supports Power-over-Ethernet (requires PoE module installation), Header for RTC power
Buttons
Reset for sketch and attached shield resets 10/100 Mbps Ethernet, Reboot to reset the Intel Quark SoC X1000
Le informazioni riportate su robot-domestici.it
possono essere soggette a modifiche senza preavviso, alcune immagini sono a titolo indicativo.
Tutti i marchi citati sono di proprietà delle rispettive case e produttori.
Informazioni aziendali
ROBOT DOMESTICI SRL - Via Cornelio Labeone, 70 - 00174 Roma (RM)
Partita IVA IT15791431008 - REA di Roma n. RM 1614298
CODICE FATTURAZIONE ELETTRONICA: KRRH6B9
Tel. (+39) 06 76971136 | e-mail: info@robot-domestici.it