Home Sviluppo progetti Supporto kit ArduSiPM Mepa

Saleae Logic 16 - 16-Channel USB Logic Analyzer

COD : AF-733
Saleae Logic 16 - 16-Channel USB Logic Analyzer
399,39 € (excl. VAT)
487,26 € (incl. IVA)
Disponibilità :
yellow.gif spedito in 3-7 giorni

Un analizzatore logico è un dispositivo che permette di guardare i segnali digitali nel progetto di elettronica.

A differenza di un oscilloscopio,non è buono per la misura di segnali analogici - ma anche a differenza di un oscilloscopio, è possibile tenere traccia di 16 segnali alla volta!

Quindi è un buon strumento complementare.

Questo analizzatore logico si inserisce in un computer e ha facile da usare software cross-platform.

Ciò lo rende piccolo, portatile e poco costoso.

Se avete mai di eseguire il debug di SPI, I2C, seriale, CAN, 1-wire, Manchester, bifase o altri protocolli digitali, questo strumento è essenziale!


    • Speedy 100MHz Logic samples each channel at up to 100 million times per second! The sample rate is flexible and based on number of channels: Sample 2 channels at 100MHz, 4 channels at 50MHz, 8 channels at 25MHz, or all 16 channels at 12.5MHz. A large fraction of practical, real world applications run at less than 10MHz, and Logic is ideal for these.
    • 16 Channels Logic16 has 16 inputs -- it can monitor 16 different digital signals at once. For many modern microcontroller-based designs, this is plenty.
    • 10 billion samples Logic can save as many as 10B samples, letting you capture even the most elusive events. No more dealing with frustratingly small sample buffers.
    • 1.8V logic welcome Works with 1.8V to 5.0V logic levels
    • Comes complete Start debugging within 5 minutes of opening your new Logic; everything is included: An ultra-flexible 22AWG 64/40 wire harness, 18 high-quality micro-hook probes, a USB cable (2 meter mini-B to A), and a nice carrying case. Download the software from our site (see software)
    • Enclosure We love well made tools. That's why we make Logic16's case out of custom CNC machined aluminum and make sure its anodized surface is finished to perfection.
    • Protection Logic's inputs are protected against over-voltage conditions via current-limiting resistors and ultra-low-capacitance diode clamps. A resettable fuse protects the USB ground return line to augment the USB host's existing protection.
    • Worry free Logic16 comes with a 2-year warranty direct from the manufacturer as well as email support
  • Technical Details

    Geometry and Weight
    • Length & Width: 3.12 inch (79.2mm)
    • Thickness: .39 in (9.8mm)
    • Volume: 3.8 in3 (62.2 cm3)
    • Weight: 2.6 oz (73.7 gm)

    Input Voltages and Thresholds
    • Input voltage range: -0.9V to 6V
    • Works with 1.8V, 2.5V, 3.3V, and 5V systems
    • Threshold Setting 1 (for 1.8V to 3.6V)
      • Input Low Voltage: <= .7V
      • Input High Voltage: >= 1.4V
    • Threshold Setting 2 (for 5V)
      • Input Low Voltage: <= 1.4V
      • Input High Voltage: >= 3.6V
    • Over-voltage protection to +/- 50V. Not meant for continuous operation outside -0.9V to 6V.
    • ESD protected per CE requirements

    Input Impedance
    • 180Kohm || 7pF (typical, approximate)

    Maximum Input Bandwidth
    • 25MHz square wave

    Crosstalk Immunity
    • Tolerant of simultaneous switching on up to 8 channels at all voltages.
    • Note that unused inputs may exhibit crosstalk if left floating. If desired, unused inputs can be disabled.

    • Pulse-width measurement: +/- 10ns @ 100MHz, +/- 20ns @ 50MHz, +/- 40ns @ 25MHz, +/- 80ns @ 12.5MHz

    Maximum Sample Rates
    • 100MHz when using 2 channels, 50MHz when using 4 channels, 25MHz when using 8 channels, and 12.5MHz when using 16 channels. Note that achieving the highest sample rates requires low USB latency; this may not be achievable on all computers. Performance may improve with the removal of other USB devices, using a different USB host controller, or increasing the software's process priority.

    Available Sampling Rates
    • 100MHz, 80MHz, 50MHz, 40Mhz, 32MHz, 25MHz, 16MHz, 12.5MHz, 10MHz, 8MHz, 6MHz, 5MHz, 4MHz, 2MHz, 1MHz, 500KHz, 250KHz

    Sample Depth
    • Up to 10B samples. Absolute maximum depends on data compressibility, available RAM and operating system. 10B samples assumes reasonably high compressibility.

    Pre-ship Testing
    • Automated testing against long pseudo-random waveforms at 1MHz and 25MHz, run at 1.8V, 2.5V, 3.3V and 5V.

    System Requirements
    • Windows XP (32-bit)
    • Windows Vista (32-bit or 64-bit)
    • Windows 7 (32-bit or 64-bit)
    • Mac OS X 10.4 Tiger or higher
    • Linux: recent Ubuntu, Fedora, or openSUSE. Other distributions are likely to work but not specifically supported.
    • USB 2.0

    What's in the Box
    • Logic16 (fully tested)
    • x2 1x9 Ultra-Flexible Test Lead Set
    • x18 Micro Hook Clips
    • USB Cable (2M length, A to mini-B)
    • Custom Carrying Case
    • Software not included —download here

    • Custom CNC machined aluminum enclosure
    • 2-part elastomer injection molded bottom cover
    • 4-layer PCB, professionally designed, laid out, and design reviewed

    • 1x18 male IDE .1 in pitch (aperture size: .110 in x 1.840 in; .030in radiused corners)
    • USB Mini-B

    • 95 mA Idle (from USB, typical)
    • 115 mA Sampling (from USB, typical)

    • RoHS Compliant
    • CE Certified

    Available Accessories
    • Extra 1x9 wire bundles
    • Extra x9 pack of test clips
    • 1x9 to 1x9 IDE cable
    • 1x9 IDE to individual wires cable

    Safety & Equipment Protection
    • Logic16 may not be used with DUTs (devices under test) which are not electrically isolated from MAINS (i.e. wall power).
    • DUTs which are battery powered, or USB powered (from the same computer as Logic16) are acceptable.
    • DUTs powered by AC adapters which have only 2 prongs, and do not have an earth ground connection (such as most "wall warts"), usually provide MAINS isolated power and are acceptable.
    • For other DUTs, isolation can typically be achieved through the use of a dedicated isolation transformer (such as those made by Tripp-lite).
    • When using USB powered DUTs, special care should be taken to avoid connecting USB sourced power to Logic16's ground, as this provides a short-circuit return path. While both Logic16 and USB ports are designed to survive a short circuit event, care should be taken to minimize its likelihood.


    Software downloads

    Video tutorial


Pagamenti con:


Carta di credito

Bonifico bancario



Spedizioni in tutto il mondo

con tariffe ridotte


Info line


orario continuato

dal lunedì al venerdì


(0039) 06 76971136



Le informazioni riportate su
possono essere soggette a modifiche senza preavviso, alcune immagini sono a titolo indicativo.
Tutti i marchi citati sono di proprietà delle rispettive case e produttori.

Sede legale

ROBOT DOMESTICI INDUSTRIES di ARMANDO PALIANI - Via Cornelio Labeone, 76 - 00174 Roma (RM)
P.I. IT12960231004 - C.F. PLNRND74R03G763Q - REA di Roma n. RM 1413309
Tel. (+39) 06 76971136 | e-mail:


facebook twitter instagram youtube pinterest