Abbiamo aggiornato la nostra informativa sulla privacy.
Se vuoi saperne di più visualizza il dettaglio della nostra informativa sulla privacy.
Questo sito utilizza i cookies di profilazione.
Proseguendo la navigazione acconsenti all'uso di tutti i cookies.
Se vuoi saperne di più visualizza il dettaglio della nostra Cookies Policy.
Intel UHD Graphics 600 (Gen9.5 LP GT1) up to 700Mhz
HDMI 2.0 and DP 1.2 multiple 4K/60Hz video outputs
RTC / BIOS backup battery is included
From June 2019, Rev-B board will be shipped. The improvements are as below;
- CLK-REQ signal pull resistor is added to support a PCIe-to-SATA bridge board - 12V SATA power source improvement for high power HDDs. - Add a M.2 screw for NVMe storage installation - Preinstalled the latest BIOS 1.05. - more detail to WiKi https://wiki.odroid.com/odroid-h2/hardware#odroid-h2_schematics
Ubuntu 19.04 x86 64bit OS compatible out of the box. Download the OS image from official Ubuntu homepage.
Dual 4K/60Hz Monitors
Demo Video
Board Detail
A
CPU (Intel Celeron J4105 Processor)
K
1 x DisplayPort 1.2
B
2 x DDR4 SO-DIMM slots (Dual channel memory support)
L
2 x RJ45 Ethernet Ports (10/100/1000)
C
1 x M.2 PCI Express Module Socket (NGFF-2280)
M
5 x System LED Indicators
D
1 x eMMC (Embedded Multimedia-Card) Socket
N
1 x Peripheral Expansion Header (20-pin)
E
2 x SATA Power Connectors
O
1 x Power Switch
F
2 x SATA3 6.0 Gb/s Data Connectors
P
1 x Reset Switch
G
1 x DC Power Jack
Q
1 x Backup Battery Connector (2-pin)
H
2 x USB 3.0
R
1 x Active Cooling Fan Connector (4-pin)
I
2 x USB 2.0
S
1 x Audio out 1 x Audio in 1 x SPDIF out
J
1 x HDMI 2.0
Specifications
Form Factor
Dimensions: 110mm x 110mm x 47mm
Weight: 285 g including heatsink
Processor
Intel Celeron J4105 Processor (14nm, TDP 10W)
Up to 2.5Ghz(Single Thread) or 2.3Ghz(Multi Thread)
4MB L2 Cache
UHD Graphics 600 (Gen 9.5 LP GT1 up to 700MHz)
Fan-less design
Memory
2 x DDR4 1.2V SO-DIMM slots
Dual Channel, up to 2400 MT/s (DDR4-PC19200)
Max memory capacity 32GB
DDR3 is not supported
Storage
1 x eMMC connector (bootable and selectable on BIOS)
Various eMMC modules can be purchased at Hardkernel store
2 x SATA3 6Gbps
1 x M.2 NVMe slot (PCIe 2.0 x 4, supports NGFF-2280 cards)
M.2 SATA SSD is not supported
Networking
2 x GbE LAN ports (RJ45, supports 10/100/1000 Mbps)
Realtek RTL8111G
Supports Wake-On-Lan
LED indicators (Green: Link, Amber: Traffic)
Video
1 x DisplayPort 1.2 (up to 4K@60Hz)
1 x HDMI 2.0 (up to 4K@60Hz)
Dual simultaneous display support
Audio
1 x Audio out (3.5mm jack)
1 x Audio in (3.5mm jack)
1 x SPDIF out (ALC662, HDA codec)
External I/O
2 x USB 3.0 Host ports
2 x USB 2.0 Host ports
1 x Peripheral Expansion Header (20-pin, 2.54mm pitch)
1 x DC 5V, 1 x DC 3.3V, 5 x GND
2 x UART (TXD/RXD/RTS/CTS)
2 x I2C (SCL/SDA)
1 x External Power Button
All 3.3V I/O signal level
Other features
Passive Heatsink
BIOS Backup Battery
Maintains system time and BIOS settings
Power Button
Reset Button
System LEDS Indicators:
Red (PWR) - Solid light when DC power is supplied
Blue (left, ALIVE) - Solid light when System is running
Blue (right, RESET) - When the RESET button is pressed
Amber (SATA) - Flashes when there is data transfer
Green (NVMe) - Flashes when there is data transfer
Active Cooling Fan Connector (5V 4-pin, PWM input + TACHO output)
Active Cooling Fan is optional
Connector (4-pin, 1.25mm pitch)
Power
1 x DC jack : outer (negative) diameter 5.5mm, inner(positive) diameter 2.1mm
Le informazioni riportate su robot-domestici.it
possono essere soggette a modifiche senza preavviso, alcune immagini sono a titolo indicativo.
Tutti i marchi citati sono di proprietà delle rispettive case e produttori.
Informazioni aziendali
ROBOT DOMESTICI SRL - Via Cornelio Labeone, 70 - 00174 Roma (RM)
Partita IVA IT15791431008 - REA di Roma n. RM 1614298
CODICE FATTURAZIONE ELETTRONICA: KRRH6B9
Tel. (+39) 06 76971136 | e-mail: info@robot-domestici.it